mariocesar
9 hours ago
I'm was closing a day of work and it stopped in the middle of a long plan, I started codex and tell it: "I was in the middle of work with Claude could you read the plan and the session "x" in ~/.claude and continue the work" it just completed everything :D
ammario
6 hours ago
Related, have found this handoff skill invaluable for moving tasks between harnesses: https://gist.github.com/ammario/cd57a1d7f6c911e079378c540b38...
adinb
an hour ago
My handoff is a handoff_latest.md that points to the latest handoff_datetime.md in a handoff folder.
jerpint
8 hours ago
I’m working on a project that makes switching between coding harnesses essentially unnoticeable. It’s particularly useful when I run out of credits on any given day
The entire platform is skill driven, and based on the premise that state is your local file system. That makes switching harnesses so easy
It’s all open source and has plenty of other features, including inter agent communication, telegram client and much more in the pipeline
calgoo
5 hours ago
Not sure what the problem with switching is? When I run out of my kimi session, I just switch model and tell deepseek to continue. Yes I eat the initial cache miss but that's it, no fancy harness required.
ludwik
10 minutes ago
You are talking about switching between models, the parent comment was about switching between harnesses. Not the same thing.
etoxin
5 hours ago
I think having a codebase that can use any harness is the optimal setup. I often switch between harnesses and models all the time at work. We have our state/spec stored in git, so we can pack it up on friday and start fresh on monday. Or more commonly, using gemini/opus to create rich specifications and using Luna to implement them. Then switching again for reviews etc.
vasco
4 hours ago
No project needed man. There's also a whole ycombinator company for the same thing, skillsync, also useless. These things are either out of the box or they are 2 prompts away.
RGS1811
9 hours ago
I did this with DeepSeek a couple of days ago.
oulu2006
9 hours ago
yeah same that's my preferred flow now -- sill use Claude and OpenAI a bit, though recent nerfs to subs has really made using codex much harder.
DS 4.1 flash is my main powerhouse and Opus/Astra my auditors (when they're not out of tokens) otherwise K3 or DS4 pro
SOLAR_FIELDS
8 hours ago
I started using Pi with Astra on a whim after really enjoying Astra and reading somewhere that you get close to identical results as with the codex harness but for a significant hunk less token usage.
Coming from mostly using Claude models, the terse factual statements coming from Astra via the Pi harness are a breath of fresh air over having to wade through the flowery verbose nonsense that Claude constantly outputs
pdntspa
5 hours ago
I recently had Astra review a fairly detailed design doc I have for an audio VST fork, that I originally wrote with Opus and/or Fable a few months ago. The doc reaches deep into signal flow and module topology while lifting most of the DSP code from other open-source projects. I had it review for feasibility and architectural soundness.
Astra found a number of flaws that would have come up during implementation and we worked through them. But then I had Fable 5.1 review that document and it found a number of issues with Astra's changes, the least of which had was that Astra duplicated a lot of technical notions that it added rather than using references to an authoritative section. It also flagged some of Astra's designs as technically impossible, pointing out why and I'm actually in the process of digesting its feedback and updating the design spec. (I hand-review each point and we work through a solution together -- I don't trust either model to come up with something that follows my vision on their own)
I'm not promoting one or the other, I just found it interesting how this sort of adversarial review found pretty significant flaws in the other model's work. I am curious as to whether this process will eventually converge on a document that both agree on or if the models are going to perpetually nitpick each other.
I haven't actually started implementation yet, so maybe one or the other is full of shit. Just trying to come up with an architecturally sound design for something I want to write, when I lack the DSP knowledge to be able to write it myself. But the intent is to pass an agent the design doc and list of milestones and let it handle implementation.
cgio
35 minutes ago
In my experience, rather than converging, you end up with a minced up concept. You have to know when to stop the loop. I filter the feedback too, and need to challenge some of the challenges as these models tend to be very conservative. I believe this is intentional, to control AI psychosis, which is indeed quite easy to get. My 2c. If you don’t have good control of what you’re working with you are either searching blind or end up with something basic.
consumer451
9 hours ago
Ignorant questions for you and anyone else using DS:
1. who hosts the inference
2. which harness are you using with it, still CC?
oulu2006
9 hours ago
So everyone has their preferred way of doing it.
1. I go direct to source, i.e. DS platform, I find it cheaper than paying the openrouter tax -- I also switch it up a bit
2. I built a local LLM router, that I update with new profiles that have my preferred provider of the week (lowest token costs/speed) with fallbacks, like mimo --> DS4 etc.. if there is overloading,
3. I use 3 diff harnesses, CC/Codex + Opencode -- they all talk to each other through a custom rig system that routes messages between llms using a Rust backed structured JSON system
Not saying this is the best, it's just what I like and works for me^.
I can flow quite naturally between Opus/Astra/K3/GLM/MiMo/DS/etc.. this way and often do...more so these days with subs no longer great as they used to be.
pavo-etc
9 hours ago
Whatever openrouter puts me on, running in pi (though I do all comms over my xmpp wrapper).
logicchains
4 hours ago
Deepseek harness is great!
ebbi
8 hours ago
how do you get the "x" session name?
drewnick
8 hours ago
You can even tell the new harness to go find your latest session in the other harness and it works perfectly. You don't even need the name!
consumer451
5 hours ago
In CC, "/exit" will tell you how to --resume <session-id> upon exit. This will eat zero tokens, and it actually does not require an active internet connection.
mariocesar
8 hours ago
`claude --resume` will list your sessions, you can copy the title. Codex may just list and grep the sessions files in ~/.claude and filter the one with the name.
I also have the habit of naming my sessions with `/rename`
simlevesque
8 hours ago
/resume in claude code.