I think that the person to whom you replied is speaking of outdoor installations, while you are speaking of controlled (maybe datacenter) installations. I have outdoor fiber running aerially between buildings on my property, in a region with massive seasonal temperature changes. Multiple local FTTH and Coaxial ISPs also run fiber on shared utility poles (the same ones that the electrical grid maintains) and when I look at the poles I see communications lines all in the same general area, often mere centimeters apart, if that.

Modern fusion splicers are also shockingly cheap. You can get one for under $600.

Even 20 years ago when i was learning they were automatic.

Netbox project used to go on and on about the philosophical justifications for not including n-type connections or different types of LMR. But the most recent release notes that I read had a blurb about all the new coax cable types they are supporting. I understand having limited time but instead of saying "no" they always had to make lofty philosophical arguments. It's weird.

> Like you can't model 1 cat5 split into two 100mb terminations

Ugh I don't really blame them there, that's really a dirty hack. Sure I've done in a pinch but not for permanent stuff.

I wouldn't call that professional network management. If you really wanna do it, just split the pairs over two patch ports IMO.

Any links to PRs or discussions?

In case you are interested in improving the drag-and-drop usage:

There are a lot of connections which look like they should work, but don't - such as patch panel to patch panel. On the other hand, it is possible to connect a single LC connector to two splices at once. There doesn't seem to be any way to unmake a connection. Overriding existing connections sometimes works, but sometimes doesn't. The tube nodes don't have a clear drag-and-drop point towards a cable. By default the tube nodes have a colored edge matching the incoming tube connection, but this edge color doesn't change when you drag a different tube from the cable onto it. The cursor sometimes wrongly shows a "+" to indicate a possible connection, such as trying to drag from one tube exit to another. It is somehow possible to connect two cable tube exits to a single tube node. It is somehow possible to connect a cable tube exit directly to a splice node.

Those probably don't matter all that much if it is almost always auto-generated, but considering the amount of weird behavior it might perhaps be better to disable the edit functionality for now?

I did my PhD on fibre lasers, 0.1 DB would have been considered a ver bad splice and I would have recut and respliced (if you have 1-10W in your cavity that 0.1 dB loss would risk burning and the fuse propagating through your cavity destroying everything in its path (as a side not look up Videos of fibre fuse, looks fascinating). In my experience 0.01-0.02 is much more typical than 0.1 dB loss.