Pretty epic. A very impressive case of building one's own tools, or, rather, a one-off tool that seems to do a simple thing. The most impressive aspect is, of course, handling various issues that normally would require making a new PCB, but the author never retreated.

> Unfortunately, having all of the transceivers in a single quad was a bit limiting due to the 7 series clocking architecture: they share the same QPLL, which has to be at 10.3125 Gbps for 10Gbase-R operation. While the CPLLs can be configured freely, they have a lower Fmax which meant that the BERT / CDR trigger channels cannot operate at arbitrary frequencies above 6 Gbps (most notably, 8 Gbps operation for PCIe gen3 mode is not available).

I'm glad someone understands this.

This is a really beautiful bit of kit, really like the case and the thought given to signing, but the analog side is really impressive too. Would it be viable to use the same hardware as a base for an NTP server?

The "root canal" side quest was definitely something. Kudos to author

Amazing levels of depth and detail here. I wonder what sort of choices I need to make to eventually acquire a lab like this.

Soldered an ESP32 together with a couple I2C sensors the other week. Didn’t work. Read post, jaw hit floor, maybe I’ll revisit the project soon. Amazing.

> My original plan had been to use their standard 1U folded sheet metal design, but I discovered too late, after boards were ordered, that it wasn’t going to work due to the 5mm corner mounting holes being inside the keepout area for the rear bend.

I wonder if a less annoying solution would have been to omit the mounting holes and then drill and tap them after the fact, possibly at a slight angle if the metal is out of plane there.

This is super impressive. Additionally, I had never heard about ngscopeclient before. Amazingly cool software!

This is very impressive.